LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> GS F >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Tire Pressure Sensor Registration >> Register Transmitter ID
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Register Transmitter ID

NOTE: When installing a new tire pressure sensor, take a note of the 7-digit number (transmitter ID) written on the new sensor.
  1. Set the tire pressure of all wheels to pressure specified on the tire and loading information label.
  2. With the ignition switch OFF, connect the Techstream to the DLC3.
  3. Turn ignition switch to ON (IG) position.
  4. Enter the following menus: Chassis / Tire Pressure Monitor / Utility / ID Registration / /Tire Number Registration.
  5. Perform the procedures displayed on the Techstream.
    NOTE: If this step is not completed within 300 seconds, Registration mode will be canceled.
scientia non olet · About LEMON Manuals