Installation [08/2015 - ]: Procedure

INSTALL NO. 2 HEIGHT CONTROL VALVE SUB-ASSEMBLY
1. Install the No. 2 height control valve with the 2 bolts.
  Torque: 29 N*m (296 kgf*cm, 21 ft.*lbf)
CONNECT HEIGHT CONTROL TUBE
1. Connect the 3 height control tubes (Refer to PRECAUTION [08/2015 - ] ).
  HINT:
  
  For the connection procedure of the tubes (type 1 and type 2), refer to Precaution of the Suspension Control System section.
2. Connect the connector.
INSTALL FUEL PUMP CONTROL ECU ASSEMBLY
Refer to PROCEDURE - Step 1
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [08/2015 - 08/2019] , or refer to INITIALIZATION [08/2019 - 08/2021] , or refer to INITIALIZATION [08/2021 - 08/2022] , or refer to INITIALIZATION [08/2022 - ] ).
CHECK CONNECTION OF TUBE FOR AIR LEAK
1. Check the connections of the tubes for air leakage (Refer to PRECAUTION [08/2015 - ] ).