Installation [08/2015 - ]: Procedure
- INSTALL SPARK PLUG
HINT:
Perform "Inspection After Repair" after replacing a spark plug.
Refer to INITIALIZATION [08/2015 - 09/2018] , or refer to INITIALIZATION [09/2018 - 09/2019] , or refer to INITIALIZATION [09/2019 - ]
- Using a 16 mm spark plug wrench, install the 4 spark plugs to the cylinder head sub-assembly.
Torque: 25 N.m (255 kgf/cm, 18 ft.lbf)
NOTE:If a spark plug has been struck or dropped, replace it.
HINT:
Install the same parts to their original positions.
- Using a 16 mm spark plug wrench, install the 4 spark plugs to the cylinder head sub-assembly.
- INSTALL IGNITION COIL ASSEMBLY
HINT:
Perform "Inspection After Repair" after replacing an ignition coil assembly.
Refer to INITIALIZATION [08/2015 - 09/2018] , or refer to INITIALIZATION [09/2018 - 09/2019] , or refer to INITIALIZATION [09/2019 - ]
- Install the 4 ignition coil assemblies to the cylinder head cover sub-assembly with the 4 bolts.
Torque: 10 N.m (102 kgf/cm, 7 ft.lbf)
NOTE:If an ignition coil assembly has been struck or dropped, replace it.
HINT:
Install the same parts to their original positions.
- Connect the 4 ignition coil assembly connectors.
- Install the 4 ignition coil assemblies to the cylinder head cover sub-assembly with the 4 bolts.
- INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 81 [08/2015 - 10/2016] , or refer to PROCEDURE - Step 80 [10/2016 - 09/2020] , or refer to PROCEDURE - Step 80 [09/2020 - ]
- PERFORM INITIALIZATION
- Perform "Inspection After Repair" after replacing an ignition coil assembly or spark plug.
Refer to INITIALIZATION [08/2015 - 09/2018] , or refer to INITIALIZATION [09/2018 - 09/2019] , or refer to INITIALIZATION [09/2019 - ]
- Perform "Inspection After Repair" after replacing an ignition coil assembly or spark plug.