Removal [08/2015 - ]: Procedure

Refer to PROCEDURE - Step 3 [08/2015 - 10/2016] , or refer to PROCEDURE - Step 3 [10/2016 - 09/2020] , or refer to PROCEDURE - Step 3 [09/2020 - ]

1. Disconnect the 4 ignition coil assembly connectors.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Remove the 4 bolts and 4 ignition coil assemblies from the cylinder head cover sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NOTE:

   If an ignition coil assembly has been struck or dropped, replace it.

   HINT: 

   Arrange the removed parts in the correct order.

1. Using a 16 mm spark plug wrench, remove the 4 spark plugs from the cylinder head sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NOTE:

   If a spark plug has been struck or dropped, replace it.

   HINT: 

   Arrange the removed parts in the correct order.