LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> IS 300 Base >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision System Warning Buzzer - Service Information >> Pre-Collision System Warning Buzzer >> Inspection [04/2013 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection [04/2013 - ]: Procedure

  1. INSPECT SKID CONTROL BUZZER ASSEMBLY 
    1. Make sure that there is no looseness at the locking part and the connecting part of the connector.
      GTY444565Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the skid control buzzer assembly connector.
    3. Check both the connector case and the terminal for deformation and corrosion.

      OK

      No deformation or corrosion.

    4. Connect a negative (-) lead from the battery to terminal 2, and a positive (+) lead to terminal 1 of the skid control buzzer assembly, and then check that the buzzer sounds.

      OK

      The skid control buzzer assembly sounds.

      If the result is not as specified, replace the skid control buzzer assembly.

scientia non olet · About LEMON Manuals