LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> IS 350 Base, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (2GR-FSE) - Service Information >> Engine Coolant Temperature Sensor >> Removal [04/2013 - 10/2017] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [04/2013 - 10/2017]: Procedure

  1. REMOVE FUEL PRESSURE SENSOR 

    Refer to REMOVAL [04/2013 - 10/2017]

  2. DISCONNECT WATER BY-PASS HOSE 
    1. Slide the clip and disconnect the water by-pass hose from the rear water by-pass joint.
      GTY404326Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the engine coolant temperature sensor connector.
    2. Using a 19 mm ball joint lock nut wrench, remove the engine coolant temperature sensor from the rear water by-pass joint.
      GTY396321Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the gasket from the engine coolant temperature sensor.
scientia non olet · About LEMON Manuals