Installation [04/2013 - 10/2017]: Procedure

1. Install the No. 2 ECM bracket to the ECM with the 2 screws.

   Torque: 3.0 N*m (31 kgf*cm, 27 in.*lbf) 

1. Install the No. 1 ECM bracket to the ECM with the 2 screws.

   Torque: 3.0 N*m (31 kgf*cm, 27 in.*lbf) 

1. Install the ECM to the engine room ECU box with the 2 nuts.

   Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

   NOTE:

   • Install the ECM to the engine room ECU box with the name plate facing the outside of the vehicle.
   • When connecting the connectors, make sure that dirt, water or other foreign matter does not become stuck between the connectors and other part.
   • If the ECM has been struck or dropped, replace it.

1. Connect the 6 ECM connectors.
   NOTE:

   Be sure to securely connect the ECM connector.

2. Engage the claw to connect the connector holder to the engine room ECU box.
3. Connect the connector to the connector holder.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

4. Connect the 2 engine wire harness connectors to the connector holder.

1. Install the engine room ECU cover with the 3 bolts.

   Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

   NOTE:

   Make sure that the wire harness does not get caught between the parts.

Refer to PRECAUTION [04/2013 - 06/2014] , or refer to PRECAUTION [06/2014 - 10/2016] , or refer to PRECAUTION [10/2016 - 10/2017]