Entry Lock Function does not Operate Using Close & Lock Function [09/2017 - ]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Smart Access / Utility / Operation History

   Body Electrical > Smart Access > Utility 

   Tester Display
   Operation History

   AUTO ENTRY WIRELESS OPERATION HISTORY
   
   

   Parameter Name	Content
   Back Door Lock & Close signal	Certification ECU (smart key ECU assembly) confirmed the back door lock & close signal.

   Result

   Result	Proceed to
   Not output	A
   "Back Door Lock & Close signal" is output	B

Result: 

B 

GO TO POWER BACK DOOR SYSTEM. Refer to  PROBLEM SYMPTOMS TABLE [09/2017 - ] 

Result: 

A 

See step  2

1. While carrying the electrical key transmitter sub-assembly, check that the entry unlock function operates when the back door opener switch is operated.

   Refer to OPERATION CHECK [09/2017 - ]

   Result

   Result	Proceed to
   Entry back door open function operates	A
   Entry back door open function does not operate	B

Result: 

A 

GO TO POWER BACK DOOR SYSTEM (Ciose & Lock Function does not Operate). Refer to  Close & Lock Function does not Operate [09/2017 - ] 

Result: 

B 

GO TO SMART ACCESS SYSTEM WITH PUSH-BUTTON START (Back Door Entry Lock and Unlock Functions do not Operate). Refer to  Back Door Entry Lock and Unlock Functions do not Operate [10/2014 - 01/2019]  , or refer to  Back Door Entry Lock and Unlock Functions do not Operate [01/2019 - ]