LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> RC 200t Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (8AR-FTS) - Service Information >> Heated Oxygen Sensor >> Removal [10/2015 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [10/2015 - ]: Procedure

  1. REMOVE ENGINE ASSEMBLY WITH TRANSMISSION 

    Refer to REMOVAL [10/2015 - ]

  2. REMOVE HEATED OXYGEN SENSOR 
    1. Disconnect the heated oxygen sensor connector.
      GTY678518Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 2 wire harness clamps.
    3. Using SST, remove the heated oxygen sensor from the exhaust manifold converter sub-assembly (TWC: Front and Rear Catalyst).
      GTY621744Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      • SST: 09224-00011 
scientia non olet · About LEMON Manuals