LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> RC 200t Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (8AR-FTS) - Service Information >> Manifold Absolute Pressure Sensor >> Removal [10/2015 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [10/2015 - ]: Procedure

  1. REMOVE NO. 1 TURBO PRESSURE SENSOR 
    1. Disconnect the No. 1 turbo pressure sensor connector.
      GTY639811Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and No. 1 turbo pressure sensor from the intake manifold.
      NOTE:

      If the No. 1 turbo pressure sensor has been struck or dropped, replace it.

  2. REMOVE NO. 2 TURBO PRESSURE SENSOR 
    1. Disconnect the No. 2 turbo pressure sensor connector.
      GTY655032Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the clamp.
    3. Slide the hose clamp and disconnect the vacuum hose from the intake manifold.
    4. Remove the bolt and No. 2 turbo pressure sensor from the intake manifold.
      NOTE:

      If the No. 2 turbo pressure sensor has been struck or dropped, replace it.

      GTY655033Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Slide the hose clamp and disconnect the vacuum hose from the No. 2 turbo pressure sensor.
      GTY655031Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals