Monitor Result
Refer to detailed information in Checking Monitor Status.
Refer to CHECKING MONITOR STATUS [09/2014 - ]
P00FE: EVAPORATIVE SYSTEM / TANK VAPOR LINE
| Monitor ID | Test ID | Scaling | Unit | Description |
|---|---|---|---|---|
| $3D | $E1 | Multiply by 0.001 | kPa | Test value for tank vapor line restricted / blocked |
P0456: EVAPORATIVE SYSTEM / SMALL LEAK
| Monitor ID | Test ID | Scaling | Unit | Description |
|---|---|---|---|---|
| $3D | $C9 | Multiply by 0.001 | kPa | Test value for small leak |
P0455: EVAPORATIVE SYSTEM / GROSS LEAK
| Monitor ID | Test ID | Scaling | Unit | Description |
|---|---|---|---|---|
| $3D | $CA | Multiply by 0.001 | kPa | Test value for gross leak |
P2401: EVAPORATIVE SYSTEM / VACUUM PMP OFF
| Monitor ID | Test ID | Scaling | Unit | Description |
|---|---|---|---|---|
| $3D | $CB | Multiply by 0.001 | kPa | Test value for leak detection pump stuck off |
P2402: EVAPORATIVE SYSTEM / VACUUM PMP ON
| Monitor ID | Test ID | Scaling | Unit | Description |
|---|---|---|---|---|
| $3D | $CD | Multiply by 0.001 | kPa | Test value for leak detection pump stuck on |
P2420: EVAPORATIVE SYSTEM / VENT VALVE OFF
| Monitor ID | Test ID | Scaling | Unit | Description |
|---|---|---|---|---|
| $3D | $CE | Multiply by 0.001 | kPa | Test value for vent valve stuck off |
P2419: EVAPORATIVE SYSTEM / VENT VALVE ON
| Monitor ID | Test ID | Scaling | Unit | Description |
|---|---|---|---|---|
| $3D | $CF | Multiply by 0.001 | kPa | Test value for vent valve stuck on |
P043E: EVAPORATIVE SYSTEM / ORIFICE CLOGGED
| Monitor ID | Test ID | Scaling | Unit | Description |
|---|---|---|---|---|
| $3D | $D0 | Multiply by 0.001 | kPa | Test value for reference orifice low flow |
P043F: EVAPORATIVE SYSTEM / ORIFICE HI-FLW
| Monitor ID | Test ID | Scaling | Unit | Description |
|---|---|---|---|---|
| $3D | $D1 | Multiply by 0.001 | kPa | Test value for reference orifice high flow |
P0441: EVAPORATIVE SYSTEM / PURGE VSV CLOSED
| Monitor ID | Test ID | Scaling | Unit | Description |
|---|---|---|---|---|
| $3D | $D4 | Multiply by 0.001 | kPa | Test value for purge VSV stuck closed |
P0441: EVAPORATIVE SYSTEM / PURGE VSV OPENED
| Monitor ID | Test ID | Scaling | Unit | Description |
|---|---|---|---|---|
| $3D | $D5 | Multiply by 0.001 | kPa | Test value for purge VSV stuck open |
P0441: EVAPORATIVE SYSTEM / PURGE FLOW
| Monitor ID | Test ID | Scaling | Unit | Description |
|---|---|---|---|---|
| $3D | $D7 | Multiply by 0.001 | kPa | Test value for purge flow insufficient |