Installation [09/2014 - ]: Procedure

INSTALL SEMICONDUCTOR POWER INTEGRATION ECU

Engage the 2 claws to install the semiconductor pwr integration ECU as shown in the illustration.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

INSTALL NO. 2 RELAY BLOCK COVER

Engage the 2 claws (B).

Engage the claw (A) to install the No. 2 relay block cover as shown in the illustration.

CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Refer to INITIALIZATION [09/2014 - 08/2016] , or refer to INITIALIZATION [08/2016 - 11/2017] , or refer to INITIALIZATION [11/2017 - 03/2019] , or refer to INITIALIZATION [03/2019 - 01/2023] , or refer to INITIALIZATION [01/2023 - 10/2023] , or refer to INITIALIZATION [10/2023 - ]