LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2018 >> GS 300 Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Service Information >> Engine Coolant Temperature Sensor >> Removal [10/2015 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [10/2015 - ]: Procedure

  1. DRAIN ENGINE COOLANT 

    Refer to PROCEDURE - Step 1

  2. REMOVE NO. 1 AIR CLEANER HOSE 
    1. Slide the hose clamp and disconnect the PCV hose from the NO. 1 air cleaner hose.
      GTY661871Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt.
    3. Loosen the 2 hose clamps and remove the NO. 1 air cleaner hose.
  3. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the connector from the engine coolant temperature sensor.
      GTY661869Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a SST, remove the engine coolant temperature sensor and gasket.
      GTY635703Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Gasket
      • SST: 09817-33191 
scientia non olet · About LEMON Manuals