LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2018 >> GX 460 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Service Information) >> Accelerator Pedal >> Removal [08/2015 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [08/2015 - ]: Procedure

  1. REMOVE FRONT NO. 1 CONSOLE BOX INSERT 

    Refer to PROCEDURE - Step 3 [08/2015 - 08/2019] , or refer to PROCEDURE - Step 3 [08/2019 - 08/2021] , or refer to PROCEDURE - Step 5 [08/2021 - ]

  2. REMOVE ACCELERATOR PEDAL POSITION SENSOR ASSEMBLY 
    NOTE:

    This accelerator pedal position sensor assembly does not require lubrication. Do not apply oil or other lubrication to the accelerator pedal position sensor assembly.

    If applied, the accelerator pedal position sensor assembly must be replaced.

    1. Disconnect the accelerator pedal position sensor connector.
      GTY275040Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 nuts and accelerator pedal position sensor assembly.
scientia non olet · About LEMON Manuals