Inspection [08/2015 - ]: Procedure
- INSPECT THROTTLE BODY ASSEMBLY
- Check the throttle valve.
- Check that the throttle valve opens and closes smoothly.
- Check that there is no sludge accumulating around the throttle body.
- Check the throttle control motor.
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition 1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω TEXT IN ILLUSTRATION*a Component without harness connected
(Throttle Body)If the result is not as specified, replace the throttle body assembly.
- Measure the resistance according to the value(s) in the table below.
- Check the throttle valve.