Installation [03/2017 - ]: Procedure

Refer to PROCEDURE - Step 1

HINT: 

Perform "Inspection After Repair" after replacing an ignition coil assembly.

Refer to INITIALIZATION [03/2017 - ]

1. Install the 8 ignition coil assemblies to the cylinder head cover sub-assembly and cylinder head cover sub-assembly LH with the 8 bolts.

   Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

   NOTE:

   If an ignition coil assembly has been struck or dropped, replace it.

   HINT: 

   Install the same parts to their original positions.

2. Connect the 8 ignition coil assembly connectors.

Refer to PROCEDURE - Step 138 [03/2017 - 06/2019] , or refer to PROCEDURE - Step 138 [06/2019 - 05/2023] , or refer to PROCEDURE - Step 141 [05/2023 - 09/2023] , or refer to PROCEDURE - Step 147 [09/2023 - ]