LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2018 >> LX 570 >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (Service Information) >> Front Speed Sensor >> Removal [09/2015 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [09/2015 - ]: Procedure

  1. PRECAUTION 
    NOTE:

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Refer to PRECAUTION [09/2015 - ] ).

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [09/2015 - 08/2019] Refer to INITIALIZATION [08/2019 - ] ).

  3. REMOVE FRONT WHEEL 
  4. REMOVE FRONT SKID CONTROL SENSOR WIRE LH 
    1. Disconnect the connector from the front speed sensor.
      GTY546203Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and harness clamp.
    3. Remove the nut and harness clamp.
    4. Remove the 2 bolts and 2 harness clamps.
      GTY611123Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Disconnect the 2 connectors and then remove the bolt, harness clamp and sensor wire.
      GTY659238Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE FRONT SPEED SENSOR LH 
    1. Remove the bolt and speed sensor from the knuckle.
      GTY606382Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Pull out the sensor while trying as much as possible not to rotate it.

  6. REMOVE FRONT SKID CONTROL SENSOR WIRE RH 
    1. Disconnect the connector from the front speed sensor.
      GTY610760Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and harness clamp.
    3. Remove the nut and harness clamp.
    4. Disconnect the connector.
      GTY109668Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Detach the connector from the skid control sensor clamp.
    6. Remove the bolt and skid control sensor clamp.
    7. Remove the 2 bolts and 2 harness clamps.
    8. Disconnect the connector and then remove the bolt, harness clamp and sensor wire.
      GTY621439Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE FRONT SPEED SENSOR RH 
    1. Remove the bolt and speed sensor from the knuckle.
      GTY578203Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Pull out the sensor while trying as much as possible not to rotate it.

scientia non olet · About LEMON Manuals