LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2018 >> NX 300h >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Service Information) >> Camshaft Position Sensor >> Removal [10/2014 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [10/2014 - ]: Procedure

  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 21 [10/2014 - 09/2016], or refer to PROCEDURE - Step 21 [09/2016 - 05/2019], or refer to PROCEDURE - Step 21 [05/2019 - ]

  2. REMOVE CAMSHAFT POSITION SENSOR 
    GTY512126Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the camshaft position sensor connector.
    2. Remove the bolt and camshaft position sensor.
scientia non olet · About LEMON Manuals