Precaution [09/2014 - 10/2015]
- POWER WINDOW CONTROL SYSTEM PRECAUTIONS WARNING:
- The power window control system prohibits the auto up/down function when the jam protection function malfunctions. Therefore, troubleshoot the power window control system after confirming that no trouble codes are output.
- If the power window regulator motor assembly has been replaced with a new one, initialize the power window control system.
- If the power window regulator motor assembly and door window regulator sub-assembly have been removed and installed, or if the power window regulator motor assembly was reused when a door glass or door glass run was replaced, initialize the power window control system.
- The jam protection function may operate unexpectedly even when the power window control system is normal, due to detection of a value different from the operation learned value when the door glass moving speed changes sharply under any of the following conditions:
- A power window is being opened or closed while the vehicle is driving on a rough road.
- A power window is being opened or closed while the door is being opened or closed.
- A sharp voltage change occurs.
NOTE:Do not disconnect the cable from the negative (-) auxiliary battery terminal while the power switch is on (IG). Otherwise, DTC B2313 will be stored.
- DOOR CONTROL RECEIVER EXPRESSIONS
- The type of door control receiver used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this article.
Vehicle Specification Part Name in Service Information Actual Part Name w/ Tire Pressure Warning System Door control receiver Door control and tire pressure monitoring system receiver assembly
- The type of door control receiver used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this article.