Installation [10/2017 - ]: Procedure

1. Install the No. 2 ECM bracket to the ECM with the 2 screws.

   Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf) 

1. Install the No. 1 ECM bracket to the ECM with the 2 screws.

   Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf) 

1. Install the ECM to the engine room ECU box with the 2 nuts.

   Torque: 5.5 N.m (56 kgf/cm, 49 in.lbf) 

   NOTE:

   If the ECM has been struck or dropped, replace it.

2. Connect the 2 ECM connectors and rotate the 2 levers to lock them.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NOTE:

   • When connecting the ECM connectors, make sure that the connecting parts of the ECM connectors are free of dirt, water and other foreign matter.
   • Be sure to securely connect the ECM connectors.

1. Install the engine room ECU cover with the 3 bolts.

   Torque: 5.5 N.m (56 kgf/cm, 49 in.lbf) 

   NOTE:

   Make sure that the wire harness does not get caught between the parts.

Refer to INITIALIZATION [10/2017 - 09/2020] , or refer to INITIALIZATION [09/2020 - 11/2021] , or refer to INITIALIZATION [11/2021 - 09/2022] , or refer to INITIALIZATION [09/2022 - 10/2023] , or refer to INITIALIZATION [10/2023 - ]