Removal [03/2017 - ]: Procedure

Refer to PROCEDURE - Step 1 [03/2017 - 04/2020] , or refer to PROCEDURE - Step 1 [04/2020 - 09/2023] , or refer to PROCEDURE - Step 1 [09/2023 - ]

Refer to PROCEDURE - Step 2 [03/2017 - 04/2020] , or refer to PROCEDURE - Step 2 [04/2020 - 09/2023] , or refer to PROCEDURE - Step 2 [09/2023 - ]

Refer to PROCEDURE - Step 3 [03/2017 - 04/2020] , or refer to PROCEDURE - Step 3 [04/2020 - 09/2023] , or refer to PROCEDURE - Step 3 [09/2023 - ]

Refer to PROCEDURE - Step 4 [03/2017 - 04/2020] , or refer to PROCEDURE - Step 4 [04/2020 - 09/2023] , or refer to PROCEDURE - Step 4 [09/2023 - ]

Refer to PROCEDURE - Step 5 [03/2017 - 04/2020] , or refer to PROCEDURE - Step 5 [04/2020 - 09/2023] , or refer to PROCEDURE - Step 5 [09/2023 - ]

Refer to PROCEDURE - Step 6 [03/2017 - 04/2020] , or refer to PROCEDURE - Step 6 [04/2020 - 09/2023] , or refer to PROCEDURE - Step 6 [09/2023 - ]

Refer to REMOVAL [03/2017 - 05/2023] , or refer to REMOVAL [05/2023 - ]

1. Fold back the floor carpet.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *A	for Bank 1
   *B	for Bank 2

2. Disconnect the 2 heated oxygen sensor connectors.

1. Detach the heated oxygen sensor grommet and clamp from the vehicle body.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.
   • SST: 09224-00012 
   NOTE:

   If the heated oxygen sensor has been struck or dropped, replace it.

1. Detach the heated oxygen sensor grommet and clamp from the vehicle body.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.
   • SST: 09224-00012 
   NOTE:

   If the heated oxygen sensor has been struck or dropped, replace it.