LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2019 >> LS 500h AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Service Information >> Engine Coolant Temperature Sensor >> Removal [10/2017 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [10/2017 - ]: Procedure

  1. REMOVE INTAKE AIR SURGE TANK ASSEMBLY 

    Refer to REMOVAL [10/2017 - 10/2020] , or refer to REMOVAL [10/2020 - 11/2021] , or refer to REMOVAL [11/2021 - 10/2022] , or refer to REMOVAL [10/2022 - 10/2023] , or refer to REMOVAL [10/2023 - ]

  2. REMOVE E.F.I. ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the E.F.I. engine coolant temperature sensor connector.
      GTY810599Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the clip and E.F.I. engine coolant temperature sensor from the rear water by-pass joint.
      GTY810594Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals