LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2019 >> LS 500h AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Service Information >> Ignition Coil And Spark Plug >> Removal [10/2017 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [10/2017 - ]: Procedure

  1. REMOVE V-BANK COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 12 [10/2017 - 09/2018] , or refer to PROCEDURE - Step 12 [09/2018 - 09/2019] , or refer to PROCEDURE - Step 12 [09/2019 - 10/2020] , or refer to PROCEDURE - Step 12 [10/2020 - 11/2021] , or refer to PROCEDURE - Step 12 [11/2021 - 10/2022] , or refer to PROCEDURE - Step 12 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 12 [10/2023 - ]

  2. REMOVE RADIATOR COVER PLATE 

    Refer to PROCEDURE - Step 3 [10/2017 - 10/2020] , or refer to PROCEDURE - Step 3 [10/2020 - 10/2023] , or refer to PROCEDURE - Step 3 [10/2023 - ]

  3. REMOVE UPPER RADIATOR SUPPORT SEAL 

    Refer to PROCEDURE - Step 2 [10/2017 - 10/2020] , or refer to PROCEDURE - Step 2 [10/2020 - 10/2023] , or refer to PROCEDURE - Step 2 [10/2023 - ]

  4. REMOVE LOWER RADIATOR AIR DEFLECTOR 

    Refer to PROCEDURE - Step 4 [10/2017 - 10/2020] , or refer to PROCEDURE - Step 4 [10/2020 - 10/2023] , or refer to PROCEDURE - Step 4 [10/2023 - ]

  5. REMOVE RADIATOR SUPPORT TO CROSS MEMBER BRACE SUB-ASSEMBLY RH 

    Refer to PROCEDURE - Step 6 [10/2017 - 10/2020] , or refer to PROCEDURE - Step 6 [10/2020 - 10/2023] , or refer to PROCEDURE - Step 6 [10/2023 - ]

  6. DISCONNECT NO. 2 PCV HOSE 

    See step  7

  7. REMOVE AIR CLEANER WITH AIR CLEANER HOSE 

    See step  9

  8. REMOVE IGNITION COIL ASSEMBLY 
    1. for Bank 2:
      GTY811198Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the 2 nuts.
      2. Detach the 2 wire harness clamps.
      3. Disconnect the E.F.I. vacuum sensor connector.
      4. Remove the bolt.
        GTY811205Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      5. Remove the clip and No. 1 engine cover sub-assembly.
        GTY810667Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      6. Disconnect the 3 ignition coil assembly connectors.
      7. Remove the 3 bolts and 3 ignition coil assemblies.
        GTY810643Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. for Bank 1:
      GTY811199Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disconnect the 3 ignition coil assembly connectors.
      2. Remove the 3 bolts and 3 ignition coil assemblies.
  9. REMOVE SPARK PLUG 

    Refer to PROCEDURE - Step 9

scientia non olet · About LEMON Manuals