DTC P060A: Internal Control Module Monitoring Processor Performance [09/2015 - ]: Procedure

CHECK DTC
1. Clear DTC (Refer to DTC CHECK / CLEAR [09/2015 - ] ).
2. Turn the engine switch off.
3. Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
4. Connect the cable to the negative (-) battery terminal.
5. Turn the engine switch on (IG).
6. Check DTC.
  OK
  
  P060A is not output.
Result:

OK

CHECK FOR INTERMITTENT PROBLEMS

(Refer to CHECK FOR INTERMITTENT PROBLEMS [09/2015 - ] )

Result:

NG

REPLACE ECM

(Refer to REMOVAL [09/2015 - ] )