Transaxle Assembly: Remove, Install, and Overhaul
WARNING: This page is about the ES 300h Base, which is a different variant/trim than selected.
Includes: Inspect and replace all necessary Transmission and Differential components and road test.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Transaxle Assembly | Includes: Disable and Enable High Voltage System. Serviced as an Assembly. Includes: Programming. Includes: R&I Suspension Crossmember Assembly. Includes: Recover, Evacuate and Recharge Air Conditioning System. DOES NOT include wheel alignment. | 12.8 | 9.0 | A |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| Rear | 0.7 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.5 | C | |||
| Combination Procedure: INPUT DAMPER ASSEMBLY: Remove & Replace: | ||||
| 0.3 | C | |||
| Combination Procedure: TRANSMISSION OIL COOLER: Clean: | ||||
| 0.5 | C | |||