Installation [10/2015 - ]: Procedure

INSTALL TRANSMISSION REVOLUTION SENSOR (SP2)
1. Install the transmission revolution sensor (SP2) to the automatic transmission case sub-assembly with the bolt.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
2. Connect the transmission revolution sensor (SP2) connector.
INSTALL TRANSMISSION REVOLUTION SENSOR (NT)
1. Coat the O-ring with ATF.
2. Using a T30 "TORX" socket wrench, install the transmission revolution sensor (NT) to the automatic transmission case sub-assembly with the bolt.
  Torque: 6.8 N*m (69 kgf*cm, 60 in.*lbf)
3. Connect the transmission revolution sensor (NT) connector.
INSTALL TRANSMISSION REVOLUTION SENSOR (NC3)
1. Install the transmission revolution sensor (NC3) to the automatic transmission case sub-assembly with the bolt.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
2. Connect the transmission revolution sensor (NC3) connector.
INSTALL TRANSMISSION VALVE BODY ASSEMBLY
Refer to INSTALLATION [10/2015 - ]