Installation [01/2017 - ]: Procedure

HINT: 

Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

Refer to INITIALIZATION [01/2017 - 09/2018] , or refer to INITIALIZATION [09/2018 - 04/2020] , or refer to INITIALIZATION [04/2020 - ]

1. Install the mass air flow meter sub-assembly with the 2 screws.
   NOTE:

   • If the mass air flow meter sub-assembly has been struck or dropped, replace it.
   • If reusing the mass air flow meter sub-assembly, be sure to inspect the O-ring.
   • Make sure that the O-ring is not cracked or does not move out of place during installation.
2. Connect the mass air flow meter sub-assembly connector.