Removal [10/2014 - 07/2020]: Procedure

Refer to PROCEDURE - Step 1

1. Fold back the fender liner and disconnect the connector.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Remove the clamp.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

3. Remove the bolt and sensor clamp from the side member.
4. Remove the clamp.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

5. Remove the bolt and sensor clamp from the absorber bracket.
6. Remove the bolt and front speed sensor LH from the steering knuckle.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NOTE:

   Prevent foreign matter from attaching to the front speed sensor LH tip.