Installation [10/2014 - ]: Procedure

HINT: 

Perform "Inspection After Repairs" after replacing the spark plug.

Refer to INITIALIZATION [10/2014 - ]

1. Using a 16 mm spark plug wrench, install the 4 spark plugs.

   Torque: 25 N*m (255 kgf*cm, 18 ft.*lbf) 

   NOTE:

   Replace with a new part if it is dropped or if it receives a strong impact.

HINT: 

Perform "Inspection After Repairs" after replacing the ignition coil assembly.

Refer to INITIALIZATION [10/2014 - ]

1. Install the 4 ignition coil assemblies with the 4 bolts.

   Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

   NOTE:

   Replace with a new part if it is dropped or if it receives a strong impact.

2. Connect the 4 ignition coil assembly connectors.

Refer to PROCEDURE - Step 94 [10/2014 - 05/2019], or refer to PROCEDURE - Step 95 [05/2019 - ]