LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2020 >> UX 200 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (M20A-FKS) (Service Information) >> Knock Sensor >> Removal [10/2018 - 07/2022] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [10/2018 - 07/2022]: Procedure

  1. REMOVE INTAKE MANIFOLD 

    Refer to REMOVAL [10/2018 - 07/2022]

  2. REMOVE KNOCK SENSOR 
    1. Disconnect the knock sensor connector.
      GTY802352Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and knock sensor from the cylinder block sub-assembly.
      NOTE:

      If the knock sensor has been struck or dropped, replace it.

scientia non olet · About LEMON Manuals