LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2021 >> ES 250 Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (A25A-FKS) - Service Information >> Knock Sensor >> Removal [08/2021 - 09/2022] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [08/2021 - 09/2022]: Procedure

  1. REMOVE GENERATOR ASSEMBLY 

    Refer to REMOVAL [08/2021 - 09/2022]

  2. REMOVE KNOCK CONTROL SENSOR 
    1. Disconnect the knock control sensor connector.
      GTY754296Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and knock control sensor from the cylinder block sub-assembly.
      NOTE:

      If the knock control sensor has been struck or dropped, replace it.

scientia non olet · About LEMON Manuals