Installation [06/2018 - ]: Procedure

1. Install the No. 2 ECM bracket to the ECM with the 2 screws.

   Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf) 

1. Install the No. 1 ECM bracket to the ECM with the 2 screws.

   Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf) 

1. Install the ECM with the 2 nuts in the order shown in the illustration.

   Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf) 

   NOTE:

   If the ECM has been struck or dropped, replace it.

   Fig 1: ECM Tightening Sequence

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the clamp.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

3. Install the engine wire to the No. 2 ECM bracket with the bolt.

   Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

4. Connect the 2 ECM connectors and rotate the 2 levers to lock them.
   NOTE:

   • When connecting the ECM connectors, make sure that the connecting parts of the ECM connectors are free of dirt, water and other foreign matter.
   • Be sure to securely connect the ECM connectors.

Refer to PROCEDURE - Step 2

Refer to PRECAUTION [06/2018 - 08/2020] , or refer to PRECAUTION [08/2020 - 08/2021] , or refer to PRECAUTION [08/2021 - 09/2022] , or refer to PRECAUTION [09/2022 - ]