Installation [06/2018 - ]: Procedure

HINT: 

Perform "Inspection After Repair" after replacing a spark plug.

Refer to INITIALIZATION [06/2018 - 07/2019] , or refer to INITIALIZATION [07/2019 - ]

1. Install the 6 spark plugs to the cylinder head sub-assembly and cylinder head LH.

   Torque: 18 N*m (184 kgf*cm, 13 ft.*lbf) 

   NOTE:

   If a spark plug has been struck or dropped, replace it.

   HINT: 

   Install the same parts to their original positions.

Refer to PROCEDURE - Step 2

Refer to PROCEDURE - Step 47

1. Perform "Inspection After Repair" after replacing an ignition coil assembly or spark plug.

   Refer to INITIALIZATION [06/2018 - 07/2019] , or refer to INITIALIZATION [07/2019 - ]