Installation [08/2015 - ]: Procedure

INSTALL SKID CONTROL BUZZER ASSEMBLY
1. Connect the connector.
  NOTE:
  Securely connect the connector.
2. Attach the clamp to install the buzzer.
  NOTE:
  - Securely insert the clamp into the dash panel.
  - If the buzzer is dropped, replace it.
INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
1. Install the instrument panel safety pad sub-assembly (Refer to INSTALLATION [08/2015 - 08/2019] , or refer to INSTALLATION [08/2019 - 08/2021] , or refer to INSTALLATION [08/2021 - ] ).
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [08/2015 - 08/2019] , or refer to INITIALIZATION [08/2019 - 08/2021] , or refer to INITIALIZATION [08/2021 - 08/2022] , or refer to INITIALIZATION [08/2022 - ] ).