Installation [08/2015 - ]: Procedure

INSTALL SPARK PLUG
HINT:

Perform "Inspection After Repairs" after replacing the spark plug (Refer to INITIALIZATION [08/2015 - ] ).
1. Using a 16 mm plug wrench, install the 8 spark plugs.
  Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)
INSTALL IGNITION COIL ASSEMBLY
HINT:

Perform "Inspection After Repairs" after replacing the ignition coil assembly (Refer to INITIALIZATION [08/2015 - ] ).
1. for Bank 1:
  Install the 4 ignition coils.
  1. Install the 4 ignition coils with the 4 bolts.
    Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  2. Connect the 4 ignition coil connectors.
  3. Attach the clamp and connect the engine wire.
2. for Bank 2:
  Install the 4 ignition coils.
  1. Install the 4 ignition coils with the 4 bolts.
    Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  2. Connect the 4 ignition coil connectors.
  3. Attach the 2 clamps and connect the engine wire.
  4. Connect the No. 4 water by-pass pipe with the 2 bolts.
    Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  5. Attach the clamp and connect the engine wire.
INSTALL AIR CLEANER CASE SUB-ASSEMBLY
Refer to PROCEDURE - Step 51 [08/2015 - 08/2020] , or refer to PROCEDURE - Step 51 [08/2020 - ]
INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
INSTALL AIR CLEANER CAP AND HOSE
Refer to PROCEDURE - Step 53 [08/2015 - 08/2020] , or refer to PROCEDURE - Step 53 [08/2020 - ]
INSTALL V-BANK COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 80 [08/2015 - 08/2020] , or refer to PROCEDURE - Step 80 [08/2020 - ]