Installation [01/2017 - ]: Procedure

INSTALL SPARK PLUG
HINT:

Perform "Inspection After Repair" after replacing a spark plug.

Refer to INITIALIZATION [01/2017 - 09/2018] , or refer to INITIALIZATION [09/2018 - 04/2020] , or refer to INITIALIZATION [04/2020 - ]
1. Install the 6 spark plugs to the cylinder head sub-assembly.
  Torque: 18 N.m (184 kgf/cm, 13 ft.lbf)
  
  NOTE:
  If a spark plug has been struck or dropped, replace it.
INSTALL IGNITION COIL ASSEMBLY
Refer to PROCEDURE - Step 2
INSTALL AIR CLEANER WITH AIR CLEANER HOSE
Refer to PROCEDURE - Step 4
CONNECT NO. 2 PCV HOSE
Refer to PROCEDURE - Step 6
INSTALL RADIATOR SUPPORT TO CROSS MEMBER BRACE SUB-ASSEMBLY RH
Refer to PROCEDURE - Step 7 [01/2017 - 06/2019] , or refer to PROCEDURE - Step 7 [06/2019 - 05/2023] , or refer to PROCEDURE - Step 7 [05/2023 - ]
INSTALL LOWER RADIATOR AIR DEFLECTOR
Refer to PROCEDURE - Step 28
INSTALL RADIATOR SUPPORT TO FRAME SEAL RH
Refer to PROCEDURE - Step 29
INSTALL V-BANK COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 118 [01/2017 - 06/2019] , or refer to PROCEDURE - Step 118 [06/2019 - 05/2023] , or refer to PROCEDURE - Step 118 [05/2023 - ]