Installation [12/2017 - ]: Procedure

1. Install the engine oil level sensor with the 2 bolts.

   Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

2. Apply a light coat of engine oil to the O-ring of the engine oil level sensor.
3. For 2WD:
   1. Install a new clip to the engine oil level sensor.
      NOTE:

      • Be careful not to allow engine oil to contact the terminals.
      • Do not use a brakes cleaner or a solvent on a connector.
   2. Connect the wire harness with the 2 bolts.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

   3. Connect the engine oil level sensor connector.
   4. Connect the crankshaft position sensor connector.
4. For AWD:
   1. Install a new clip to the engine oil level sensor.
      NOTE:

      • Be careful not to allow engine oil to contact the terminals.
      • Do not use a brakes cleaner or a solvent on a connector.
   2. Connect the engine oil level sensor connector.

Refer to PROCEDURE - Step 30 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 30 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 29 [10/2020 - ]

Refer to PROCEDURE - Step 13 [12/2017 - 11/2021] , or refer to PROCEDURE - Step 13 [11/2021 - ]

Refer to PROCEDURE - Step 14 [12/2017 - 11/2021] , or refer to PROCEDURE - Step 14 [11/2021 - ]

Refer to PROCEDURE - Step 15 [12/2017 - 11/2021] , or refer to PROCEDURE - Step 15 [11/2021 - ]

Refer to PROCEDURE - Step 1

Refer to PROCEDURE - Step 179 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 179 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 180 [10/2020 - 10/2023] , or refer to PROCEDURE - Step 179 [10/2023 - ]

Refer to PROCEDURE - Step 180 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 180 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 181 [10/2020 - 10/2023] , or refer to PROCEDURE - Step 180 [10/2023 - ]

Refer to PROCEDURE - Step 181 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 181 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 182 [10/2020 - 10/2023] , or refer to PROCEDURE - Step 181 [10/2023 - ]

Refer to PROCEDURE - Step 182 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 182 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 183 [10/2020 - 10/2023] , or refer to PROCEDURE - Step 182 [10/2023 - ]

Refer to PROCEDURE - Step 183 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 183 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 184 [10/2020 - 10/2023] , or refer to PROCEDURE - Step 183 [10/2023 - ]

Refer to PROCEDURE - Step 184 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 184 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 185 [10/2020 - 10/2023] , or refer to PROCEDURE - Step 184 [10/2023 - ]

Refer to PROCEDURE - Step 185 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 185 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 186 [10/2020 - 10/2023] , or refer to PROCEDURE - Step 185 [10/2023 - ]

Refer to PROCEDURE - Step 186 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 186 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 187 [10/2020 - 10/2023] , or refer to PROCEDURE - Step 186 [10/2023 - ]

Refer to PROCEDURE - Step 187 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 187 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 188 [10/2020 - 10/2023] , or refer to PROCEDURE - Step 187 [10/2023 - ]

Refer to PROCEDURE - Step 188 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 188 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 189 [10/2020 - 10/2023] , or refer to PROCEDURE - Step 188 [10/2023 - ]