LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2021 >> LS 500 Base, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Service Information >> Air Fuel Ratio Sensor >> Removal [12/2017 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [12/2017 - ]: Procedure

  1. REMOVE V-BANK COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 11 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 11 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 11 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 11 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 11 [10/2023 - ]

  2. REMOVE RADIATOR COVER PLATE 

    Refer to PROCEDURE - Step 9 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 9 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 9 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 9 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 9 [10/2023 - ]

  3. REMOVE UPPER RADIATOR SUPPORT SEAL 

    Refer to PROCEDURE - Step 8 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 8 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 8 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 8 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 8 [10/2023 - ]

  4. REMOVE LOWER RADIATOR AIR DEFLECTOR 

    Refer to PROCEDURE - Step 10 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 10 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 10 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 10 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 10 [10/2023 - ]

  5. REMOVE TRANSMISSION UNDER COVER (for 2WD) 

    Refer to PROCEDURE - Step 16 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 16 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 16 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 16 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 16 [10/2023 - ]

  6. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY (for 2WD) 

    Refer to PROCEDURE - Step 17 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 17 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 17 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 17 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 17 [10/2023 - ]

  7. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY (for AWD) 

    Refer to PROCEDURE - Step 22 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 22 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 22 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 22 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 22 [10/2023 - ]

  8. REMOVE FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH (for AWD) 

    Refer to REMOVAL [12/2017 - ]

  9. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1) 
    1. Disconnect the air fuel ratio sensor connector.
      GTY817281Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Detach the wire harness clamp.
    3. Using SST, remove the air fuel ratio sensor from the converter with catalyst assembly RH.
      GTY782349Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      • SST: 09224-00012 
  10. REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1) 
    1. Disconnect the air fuel ratio sensor connector.
      GTY836535Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Detach the 2 wire harness clamps.
    3. Using SST, remove the air fuel ratio sensor from the converter with catalyst assembly LH.
      GTY837386Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      • SST: 09224-00012 
  11. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 2) 
    1. for 2WD:
      1. Disconnect the air fuel ratio sensor connector.
        GTY817263Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      2. Detach the wire harness clamp.
      3. Using SST, remove the air fuel ratio sensor from the converter with catalyst assembly RH.
        GTY780421Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        • SST: 09224-00012 
    2. for AWD:
      1. Disconnect the air fuel ratio sensor connector.
        GTY817584Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      2. Detach the 6 wire harness clamps.
      3. Using SST, remove the air fuel ratio sensor from the converter with catalyst assembly RH.
        GTY797483Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        • SST: 09224-00012 
  12. REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 2) 
    1. for 2WD:
      1. Disconnect the air fuel ratio sensor connector.
        GTY836532Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      2. Using SST, remove the air fuel ratio sensor from the converter with catalyst assembly LH.
        GTY776539Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        • SST: 09224-00012 
    2. for AWD:
      1. Disconnect the air fuel ratio sensor connector.
        GTY836531Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      2. Detach the 4 wire harness clamps.
      3. Using SST, remove the air fuel ratio sensor from the converter with catalyst assembly LH.
        GTY794059Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        • SST: 09224-00012 
scientia non olet · About LEMON Manuals