Inspection [12/2017 - ]: Procedure
- INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
Standard Resistance (for Bank 1)
Tester Connection Condition Specified Condition D9-5 (M-) - D9-6 (M+) 20°C (68°F) 0.3 to 100 Ω Standard Resistance (for Bank 2)
Tester Connection Condition Specified Condition D37-5 (M2-) - D37-6 (M2+) 20°C (68°F) 0.3 to 100 Ω *A for Bank 1 *B for Bank 2 *a Component without harness connected
(Throttle Body with Motor Assembly)If the result is not as specified, replace the throttle body with motor assembly.
- Measure the resistance according to the value(s) in the table below.