| Turn Light RH |
Turn signal switch (right) status |
ON or OFF |
ON: Turn signal switch (right) on
OFF: Turn signal switch (right) off |
- |
| Turn Light LH |
Turn signal switch (left) status |
ON or OFF |
ON: Turn signal switch (left) on
OFF: Turn signal switch (left) off |
- |
| PCS OFF Switch |
Pre-collision system on/off status |
ON or OFF |
ON: Pre-collision system on
OFF: Pre-collision system off |
- |
| PCS Indicator |
PCS malfunction warning message display request |
ON or OFF |
ON: Warning message displayed
OFF: Warning message not displayed |
"Pre-Collision System Malfunction Visit Your Dealer" is displayed |
| PCS Disabled Indicator |
PCS unavailable warning message display request |
ON or OFF |
ON: Warning message displayed
OFF: Warning message not displayed |
"Pre-Collision System Unavailable" is displayed |
| Pre-Collision Warning Buzzer |
Pre-collision system warning buzzer |
Valid or Inval |
Valid: Pre-collision system warning buzzer operation possible
Inval: Pre-collision system warning buzzer operation not possible |
- |
| Pre-Collision Brake |
Pre-collision brake function |
Valid or Inval |
Valid: Pre-collision brake operation possible
Inval: Pre-collision brake operation not possible |
- |
| PBA Start |
Pre-collision brake assist activation signal |
OFF, Standby, Assist Lv1 or Assist Lv2 |
OFF: Pre-collision brake assist not operating Standby: Brake pedal not depressed during pre-collision brake assist operation
Assist Lv1: Brake pedal depressed during pre-collision brake assist operation
Assist Lv2: Brake pedal firmly depressed during pre-collision brake assist operation |
Signal status changes when the pre-collision brake assist is activated before a collision (Pre-collision brake will activate only in situations where the driver depresses the brake pedal) |
| Warning Brake |
- |
- |
- |
Not applicable to the vehicle |
| Brake Assist Standby |
Supplemental brake pressure signal |
ON or OFF |
ON: Supplemental brake pressure being provided
OFF: Supplemental brake pressure not being provided |
- |
| Pre-Collision Brake Control |
Pre-collision brake operational status |
ON or OFF |
ON: Pre-collision brake operating
OFF: Pre-collision brake not operating |
- |
| AVS Start |
- |
- |
- |
Not applicable to the vehicle |
| VGRS Start |
- |
- |
- |
Not applicable to the vehicle |
| PBA Control |
Pre-collision brake assist operational status |
Valid or Invalid |
Valid: Pre-collision brake assist control operation possible
Invalid: Pre-collision brake assist control operation not possible |
- |
| Pre-Crash Safety Brake Ind |
Pre-collision system alarm warning message status |
ON or OFF |
ON: Displayed
OFF: Not displayed |
"BRAKE!" is displayed |
| PCS Crash Alarm Buzzer |
Skid control buzzer status |
ON or OFF |
ON: Skid control buzzer sounding
OFF: Skid control buzzer not sounding |
- |
| Front Radar-Low Voltage History |
Millimeter wave radar sensor assembly low voltage history |
ON or OFF |
ON: History of low voltage
OFF: No history of low voltage |
- |
| Front Radar- Incorrect Axial Gap (Vertical) History |
Millimeter wave radar sensor assembly vertical misalignment history |
ON or OFF |
ON: History of vertical misalignment
OFF: No history of vertical misalignment |
- |
| Front Radar- Incorrect Axial Gap (Horizontal) History |
Millimeter wave radar sensor assembly horizontal misalignment history |
ON or OFF |
ON: History of horizontal misalignment
OFF: No history of horizontal misalignment |
- |
| Front Recognition Camera-Malfunction History |
Forward recognition camera malfunction history (abnormal temperature, low voltage, DTC stored, etc.) |
ON or OFF |
ON: History of malfunction
OFF: No history of malfunction |
- |
| Control Mode |
ECU control mode status |
Normal or Check |
Normal: Normal operation
Check: Operating in Control Mode |
- |
| PCS Operation State Retention Setting |
PCS Operation State Retention Setting customize setting |
ON or OFF |
ON: Customize setting set to ON
OFF: Customize setting set to OFF |
- |
| PCS Alarm Activation Distance Retention Setting 1 |
PCS Alarm Activation Distance Retention Setting 1 customize setting |
ON or OFF |
ON: Customize setting set to ON
OFF: Customize setting set to OFF |
- |
| PCS Alarm Activation Distance Retention Setting 2 |
PCS Alarm Activation Distance Retention Setting 2 customize setting |
ON or OFF |
ON: Customize setting set to ON
OFF: Customize setting set to OFF |
- |
| PCS Alarm Activation Distance Retention Setting 3 |
PCS Alarm Activation Distance Retention Setting 3 customize setting |
ON or OFF |
ON: Customize setting set to ON
OFF: Customize setting set to OFF |
- |