How To Proceed With Troubleshooting [10/2014 - 05/2019]: Procedure

Result

Result: 

NEXT 

See step  2

1. Interview the customer and confirm the trouble.

   Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2014 - 09/2017] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2017 - 05/2019]

   Result

   Result
   NEXT

Result: 

NEXT 

See step  3

1. Check and record DTC and Freeze Frame Data.

   Refer to DTC CHECK / CLEAR [10/2014 - 05/2019]  for DTC Check/Clear

   Refer to FREEZE FRAME DATA [10/2014 - 09/2017] , or refer to FREEZE FRAME DATA [09/2017 - 05/2019]  for Freeze Frame Data

2. Clear the DTC and Freeze Frame Data.

   Refer to DTC CHECK / CLEAR [10/2014 - 05/2019]  for DTC Check/Clear

   Refer to FREEZE FRAME DATA [10/2014 - 09/2017] , or refer to FREEZE FRAME DATA [09/2017 - 05/2019]  for Freeze Frame Data

   Chassis > ABS/VSC/TRAC > Clear DTCs 

3. Reconfirm the DTC.
   1. Reconfirm the DTC based on the recorded DTC and Freeze Frame Data.

      Refer to DTC CHECK / CLEAR [10/2014 - 05/2019]  for DTC Check/Clear

      Refer to FREEZE FRAME DATA [10/2014 - 09/2017] , or refer to FREEZE FRAME DATA [09/2017 - 05/2019]  for Freeze Frame Data

      Chassis > ABS/VSC/TRAC > Trouble Codes 

      HINT: 

      • If DTC U0100, U0124 or U0126 is output together with a CAN communication DTC, first check the appropriate sensor for a momentary open circuit.

        Refer to CHECK FOR INTERMITTENT PROBLEMS [10/2014 - 05/2019] 

      • If there is no response from the skid control ECU (brake actuator assembly), inspect the IG1 circuit of the skid control ECU (brake actuator assembly).

        Refer to DTC C1241: Low Power Supply Voltage Malfunction [10/2014 - 05/2019]

      Result

      Proceed to
      DTC is output
      DTC is not output (Problem symptom does not occur)
      DTC is not output (Problem symptom occurs)

Result: 

DTC is not output (Problem symptom does not occur) 

See step  5

Result: 

DTC is not output (Problem symptom occurs) 

See step  6

Result: 

DTC is output 

See step  4

1. Proceed to Diagnostic Trouble Code Chart.

   Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2014 - 09/2017] , or refer to DIAGNOSTIC TROUBLE CODE CHART [09/2017 - 05/2019] 

   Result

   Result
   NEXT

Result: 

NEXT 

See step  7

1. Proceed to Check for Intermittent Problems.

   Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2014 - 09/2017] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2017 - 05/2019]

   Result

   Result
   NEXT

Result: 

NEXT 

See step  6

1. Proceed to Problem Symptoms Table.

   Refer to PROBLEM SYMPTOMS TABLE [10/2014 - 05/2019] 

   Result

   Result
   NEXT

Result: 

NEXT 

See step  7

Result

Result: 

NEXT 

See step  8

Result

Result: 

NEXT 

See step  9

Result

Result: 

NEXT 

See step  10

Result

Result: 

NEXT 

END