General Maintenance [10/2014 - 09/2017]: Procedure
- INSPECT DRIVE BELT
- Check the drive belt.
Type See procedure 8AR-FTS Refer to ON-VEHICLE INSPECTION [10/2014 - ]
- Check the drive belt.
- INSPECT ENGINE OIL
- Inspect the engine oil.
Type See procedure 8AR-FTS Refer to ON-VEHICLE INSPECTION [10/2014 - ]
- Inspect the engine oil.
- REPLACE ENGINE OIL AND OIL FILTER
- Replace the engine oil and oil filter.
Type See procedure 8AR-FTS Refer to REPLACEMENT [10/2014 - 05/2018]
- Replace the engine oil and oil filter.
- INSPECT COOLING AND HEATER SYSTEM
Check that the radiator, condenser and/or intercooler is not blocked with leaves, dirt or insects, and clean them if necessary. Also check the hose connection for the installation condition, corrosion, etc.
- INSPECT ENGINE COOLANT
- Inspect the engine coolant.
Type See procedure Cooling System Refer to ON-VEHICLE INSPECTION [10/2014 - ] Intercooler Refer to ON-VEHICLE INSPECTION [10/2014 - ]
- Inspect the engine coolant.
- REPLACE ENGINE COOLANT
- Replace the engine coolant.
Type See procedure Cooling System Refer to REPLACEMENT [10/2014 - ] Intercooler Refer to REPLACEMENT [10/2014 - ]
- Replace the engine coolant.
- INSPECT EXHAUST PIPES AND MOUNTINGS
- Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.
- REPLACE SPARK PLUGS
- Replace the spark plugs.
Type See procedure 8AR-FTS Refer to REMOVAL [10/2014 - ]
- Replace the spark plugs.
- INSPECT AIR CLEANER FILTER ELEMENT
- Remove the air cleaner filter element.
- Check that the air cleaner filter element is not excessively dirty.
If the air cleaner filter element is excessively dirty, replace the air cleaner filter element.
- If cleaning the air cleaner filter element, blow compressed air as shown in the illustration to clean it.
- Reinstall the air cleaner filter element.
- INSPECT FUEL TANK CAP GASKET
- Check the fuel tank cap gasket.
Type See procedure 8AR-FTS Refer to INSPECTION [10/2014 - 05/2018]
- Check the fuel tank cap gasket.
- INSPECT FUEL LINES, CONNECTIONS, FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BANDS
- Visually check the fuel lines and hoses for cracks, leaks, loose connections, or deformation.
- Check the tank bands for looseness or deformation.