On-Vehicle Inspection [10/2014 - ]: Procedure
- INSPECT THROTTLE WITH MOTOR BODY ASSEMBLY
- Put the engine in inspection mode (maintenance mode).
- Start the engine and check that the MIL is not illuminated. After the engine is warmed up, check that the idle speed is within the specified range when the A/C is switched off.
Standard
Condition Engine Idle Speed A/C switched off 950 to 1050 rpm NOTE:- Be sure to perform this step with all accessories off.
- Make sure that the shift lever is in P.
- Perform a road test and confirm that there are no abnormalities.