LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2021 >> RC 350 Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (2GR-FKS) - Service Information >> Camshaft Position Sensor >> Removal [11/2017 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [11/2017 - ]: Procedure

  1. REMOVE V-BANK COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 4

  2. REMOVE ENGINE ROOM SIDE COVER 

    Refer to PROCEDURE - Step 1 [11/2017 - 10/2018] , or refer to PROCEDURE - Step 1 [10/2018 - 10/2022] , or refer to PROCEDURE - Step 1 [10/2022 - ]

  3. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE 

    See step  5

  4. REMOVE VVT SENSOR (for Intake Side of Bank 1) 
    1. Disconnect the VVT sensor connector.
      GTY682649Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and VVT sensor from the cylinder head cover sub-assembly.
  5. REMOVE VVT SENSOR (for Exhaust Side of Bank 1) 
    1. Disconnect the VVT sensor connector.
      GTY658585Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and VVT sensor from the cylinder head cover sub-assembly.
  6. DISCONNECT ENGINE WIRE 
    1. Disengage the clamp.
      GTY825732Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the 2 camshaft timing oil control solenoid assembly connectors and water inlet with thermostat sub-assembly connector.
    3. Remove the bolt to disconnect the engine wire from the timing chain cover assembly.
    4. Disengage the 3 clamps.
      GTY804267Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Remove the 2 nuts to disconnect the engine wire from the cylinder head cover sub-assembly LH.
    6. Disconnect the 2 VVT sensor connectors and 2 ignition coil assembly connectors.
  7. REMOVE VVT SENSOR (for Intake Side of Bank 2) 
    1. Remove the bolt and VVT sensor from the cylinder head cover sub-assembly LH.
      GTY833651Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE VVT SENSOR (for Exhaust Side of Bank 2) 
    1. Remove the bolt and VVT sensor from the cylinder head cover sub-assembly LH.
      GTY833653Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals