Brake System (Complete): Remove & Replace

Includes: Replace Calipers and/or Wheel Cylinders, Brake Shoes and/or Pads. Clean, lube and/or replace Brake Hardware as necessary. Inspect Master Cylinder, all Hoses and bleed Brake System. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
All Wheels		2.6		B
Combination Procedure: BRAKE HOSE: Replace:
Each		0.1		B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
		0.5		B
Combination Procedure: DISC ROTOR: Correct:
Lateral Runout,Each	Correct Rotor lateral runout by indexing or correction plate.	0.2		B
Combination Procedure: HUB & ROTOR DISC: Clean & Inspect:
Corrosion,Each	Clean any rust or corrosion from mating surface of Hub/Axle Flange and Brake Rotor.	0.2		B
Combination Procedure: PARKING BRAKE SHOE & LINING: Replace:
Each Side		0.4		B
Combination Procedure: WHEEL BEARING: Replace:
Front,Hub Assembly,One Side		0.3		B
Rear,One Side,w/Axle Carrier Removal	DOES NOT include wheel alignment.	2.7		B
Rear,One Side,w/o Axle Carrier Removal		1.0		B