Installation [09/2014 - 11/2017]: Procedure
- INSTALL STEERING WHEEL HEATER CONTROL ASSEMBLY
- Connect the connector to the steering wheel heater control assembly.
- Engage the clamp.
- Install the steering wheel heater control assembly to the lower steering wheel boss cover with the 2 screws.
Torque: 0.835 N.m (9 kgf/cm, 7 in.lbf)
- Engage the 4 claws to install the lower steering wheel boss cover to the steering wheel assembly.
- INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)
See step 3