LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2021 >> RC F Base >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transmission System - Service Information >> Speed Sensor >> Installation [09/2014 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation [09/2014 - ]: Procedure

  1. INSTALL TRANSMISSION REVOLUTION SENSOR (SP2) 
    1. Install the transmission revolution sensor (SP2) to the automatic transmission case sub-assembly with the bolt.

      Torque: 5.4 N.m (55 kgf/cm, 48 in.lbf) 

    2. Connect the transmission revolution sensor (SP2) connector.
  2. INSTALL TRANSMISSION REVOLUTION SENSOR (NT) 
    1. Coat the O-ring with ATF.
    2. Using a T30 "TORX" socket wrench, install the transmission revolution sensor (NT) to the automatic transmission case sub-assembly with the bolt.

      Torque: 6.8 N.m (69 kgf/cm, 60 in.lbf) 

    3. Connect the transmission revolution sensor (NT) connector.
  3. INSTALL TRANSMISSION REVOLUTION SENSOR (NC3) 
    1. Install the transmission revolution sensor (NC3) to the automatic transmission case sub-assembly with the bolt.

      Torque: 5.4 N.m (55 kgf/cm, 48 in.lbf) 

    2. Connect the transmission revolution sensor (NC3) connector.
  4. INSTALL TRANSMISSION VALVE BODY ASSEMBLY 

    Refer to INSTALLATION [09/2014 - ] 

scientia non olet · About LEMON Manuals