LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2021 >> RC F Fuji Speedway Edition >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System - Service Information >> Multi-Display >> Installation [09/2014 - 11/2017] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation [09/2014 - 11/2017]: Procedure

  1. INSTALL MULTI-DISPLAY ASSEMBLY 
  2. INSTALL NO. 1 MULTI-DISPLAY BRACKET 
    1. Install the No. 1 multi-display bracket with the 2 screws.
  3. INSTALL MULTI-DISPLAY ASSEMBLY WITH BRACKET 
    1. Engage the clamp.
    2. Connect each connector.
    3. Push the multi-display assembly with bracket as shown in the illustration to engage the 4 clips.
      GTY501179Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Install the multi-display assembly with bracket with the 2 bolts.
  4. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 13

  5. INSTALL METER HOOD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 31

  6. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 34

  7. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 35

  8. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 36

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Refer to INITIALIZATION [09/2014 - 08/2016] , or refer to INITIALIZATION [08/2016 - 11/2017]

  10. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column) 

    Refer to PROCEDURE - Step 15

scientia non olet · About LEMON Manuals