Removal [09/2014 - ]: Procedure

REMOVE TRANSMISSION VALVE BODY ASSEMBLY
Refer to REMOVAL [09/2014 - ]
REMOVE TRANSMISSION REVOLUTION SENSOR (NC3)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Disconnect the transmission revolution sensor (NC3) connector.
2. Remove the bolt and transmission revolution sensor (NC3) from the automatic transmission case sub-assembly.
REMOVE TRANSMISSION REVOLUTION SENSOR (NT)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Disconnect the transmission revolution sensor (NT) connector.
2. Using a T30 "TORX" socket wrench, remove the bolt and transmission revolution sensor (NT) from the automatic transmission case sub-assembly.
REMOVE TRANSMISSION REVOLUTION SENSOR (SP2)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Disconnect the transmission revolution sensor (SP2) connector.
2. Remove the bolt and transmission revolution sensor (SP2) from the automatic transmission case sub-assembly.