Removal [10/2015 - ]: Procedure

REMOVE FRONT WHEEL OPENING EXTENSION PAD LH
Refer to PROCEDURE - Step 4 [10/2015 - 08/2016] , or refer to PROCEDURE - Step 4 [08/2016 - 12/2017] , or refer to PROCEDURE - Step 4 [12/2017 - 08/2019] , or refer to PROCEDURE - Step 4 [08/2019 - ]
REMOVE NO. 3 ENGINE UNDER COVER
Refer to PROCEDURE - Step 5 [10/2015 - 08/2016] , or refer to PROCEDURE - Step 5 [08/2016 - 12/2017] , or refer to PROCEDURE - Step 5 [12/2017 - 08/2019] , or refer to PROCEDURE - Step 5 [08/2019 - ]
DRAIN ENGINE COOLANT (for Engine)
Refer to PROCEDURE - Step 3 [10/2015 - 03/2018] , or refer to PROCEDURE - Step 3 [03/2018 - ]
REMOVE V-BANK COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 23 [10/2015 - 08/2016] , or refer to PROCEDURE - Step 23 [08/2016 - 12/2017] , or refer to PROCEDURE - Step 23 [12/2017 - 08/2019] , or refer to PROCEDURE - Step 25 [08/2019 - ]
REMOVE COOL AIR INTAKE DUCT SEAL
Refer to PROCEDURE - Step 1 [10/2015 - 08/2016] , or refer to PROCEDURE - Step 1 [08/2016 - 08/2019] , or refer to PROCEDURE - Step 1 [08/2019 - ]
REMOVE INLET AIR CLEANER ASSEMBLY
See step 5

REMOVE ENGINE COOLANT TEMPERATURE SENSOR

Disconnect the engine coolant temperature sensor connector.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the clip and engine coolant temperature sensor from the water outlet.

NOTE:

If the engine coolant temperature sensor has been struck or dropped, replace it.